Datasheet - Rod/wire electrode for Copper alloys

Typical composition in %  
Ni 9,0 - 11,0
Fe 0,5 - 2,0
C < 0,03
Mn 0,5 - 1,5
Si < 0,2
Ti 0,2 - 0,5
Al < 0,03
S < 0,02
P < 0,007
Pb < 0,02
Others total < 0,4
Classification  
ISO 24373 S Cu 7061 (CuNi10)
DIN 1733 SG-CuNi10Fe
Material No. 2.0873
BS 2901 part 3 C 16
Base materials
Particularly suitable for highly stressed corrosion resistant weld surfacing on cast iron and on unalloyed and low-alloyed steel, seawater resistant CuZn alloys. Appropriate to joining/surfacing on Cu-Ni material. Especially recommended for plant engineering.
Remarks

Filler metal for joining and surfacing of Al-bronze, brass, steel- and cast-iron, as well as for MIG-brazing of carbonsteel with and without coating. Suitable for joining of steel to Copper. The weld metal is resistant to corrosion, wear and brackish water.

Physical properties (Approx. values)  
Electrical conductivity [S*m/mm²] 5
Therm. conductivity [W/m K] 45
Density [kg/dm³] 8,9
Melting temperature [° C] 1.150
Tensile strength Rm [MPa] 350
Elongation A5 (Lo=5d0) [%] 40
Modulus of elasticity [MPa] 126.000
Welding position
PA, PB, PC, PD, PE, PF
Shielding gas
I1, I2, I3 (Argon, Helium or Argon/Helium-mixtures)
Polarity
MIG =+, TIG =-
Dimensions  
MIG-wires [mm] 0,8; 1,0; 1,2; 1,6;
TIG-rods [mm] 1,6; 2,0; 2,4; 3,2; 4,0;
Packaging
Spools Packaging units
B 300 / BS 300 / 15 kg 25 spools = 375 kg (Pallet)
Rods

TIG-rods are packed in boxes of 10kg. The length is 1.000 mm.

DesignationItem numberQuantity in
stock [kg]
wire electrode CuNi10Fe D=1,0mm 8,0873,07,100
wire electrode CuNi10Fe D=1,2mm 8,0873,07,120
wire electrode CuNi10Fe D=1,6mm 8,0873,07,160

DesignationItem numberQuantity in
stock [kg]
TIG-rods CuNi10Fe D=1,6mm 8,0873,12,160
TIG-rods CuNi10Fe D=2,0mm 8,0873,12,200
TIG-rods CuNi10Fe D=2,4mm 8,0873,12,240
Thats not all

Further related information